Log ind

Produkter     ........max/side


Indkøbskurv


Søg


Filters:

Elektronik moduler til alle opgaver.

Thiim A/S udvikler og producerer selv simple og komplekse kontrol- og målemoduler, der sælges i Danmark og eksporteres til en række lande. Vi kan levere en bred vifte af standard moduler, men arbejder i stor stil også med kundespecificerede opgaver. Har du en opgave, som ikke kan løses med et standard produkt, så ring til os, og vi vil gøre vores bedste for at hjælpe.
 

Produkter
Måleværdiomformere og isolationsforstærkere. Målerelæer for: strøm, spænding, frekvens, fasefejl, fasevinkel, fasefølge og temperatur. Automatisk motorstart, hastighedsrelæer, synkronisere samt forstærkere for følere.

 
 
Produktion
Fleksibilitet er nøgleordet for vores produktion. Vi kan derfor efterkomme alle størrelser af ordrer, hvor store eller små de end måtte være.
 
 

Udvikling
Vi anvender de mest moderne udviklingsværktøjer til udviklingen af vores produkter. Vi har egen udvikling og produktion, der dermed giver os fuld kontrol over processen.

 
 
Detaljer
Når vi udvikler vores produkter, sker det med en høj fleksibilitet for øje. Vi implementerer en række  ekstra brugbare features, som tilgodeser alle brugergrupper og behov.
 
 
Teknologi
Til vores produkter anvender vi udelukkende komponenter af højeste kvalitet. Det er derfor vores specifikationer er blandt de bedste i klassen og vores fejltolerence er lav.
 

Datablade
Herunder ser du en liste over alle vores standardprodukter indenfor elektronik, som vi selv har udviklet og producerer.
Ud for hver gruppe er det muligt at hente specifikt datablad, eller du kan hente det komplette katalog  Tryk her

Smart Grid Unit
          SGU AC Smart Grid Unit, med fiber forbundne CT's (isoleret)  1A - 400A
          SGU AC Smart Grid Unit, med lednings forbundnene CT's  1A - 500A
Control relays
        Current, Single Phase
          IMCA AC-DC Multifunction, 12 rages for under or over current in one unit  0,5mA - 10A
    IDRA DC Low cost, 4 standard currents 3 - 16A
    ILUA DC Current loop relay 4 - 20mA
    ILUB DC Current loop relay w. precision adjustment 4 - 20mA
  Current, Single Phase, with through hole for CT
    IMAA   Current, Earth leakage and Differential current
Multifunction with 12 current ranges in one unit
5mA - 100A
    IADA AC Current detecting relay with delayed drop out. 12VDC supply 9 - 16VDC
    DDCA DC Current, Earth leakage and Differential current. 6 current settings 5 - 200mA
    DDCB DC Current, Earth leakage and Differential current. 6 current settings (Ext. coil) 5 - 300mA
    DDEA DC Current, Earth leakage for DC unearthed systems, Asym leakage 0,2 - 30mA
    DDEB DC Current, Earth leakage for DC unearthed systems, Asym & Sym leakage 0,2 - 30mA
  Current, single Phase, with voltage compensated setpoint
    IUAB AC AC current relay, monitoring up to 10 loads, error if one or more fails 0,2 - 2,5A
      Voltage, Single Phase
    UMCA AC-DC Multifunction, 11 ranges in one 50mV - 500V 
    UAWA AC Window Voltage relay. Individual low & high voltage setting 100 - 415V
  Voltage, Single Phase, incl. frequency control 
    UFWA AC Window voltage & frequency relay. Individual low & high voltage setting 100 - 415V
  Voltage, 3 phase 4 wire 
    PNDA AC 4w Phase under voltage & phase sequence 100 - 415V
    PNDI AC 4w Phase under voltage & phase sequence with true time delay 100 - 480V
Battery Control relays
          BMCA DC Battery low voltage monitoring relay. For 12V, 24V, 48V & 110V batteries.
Replacement for BVCA, BVCB, BVCC
8 - 80V
          BMCD DC Battery high/low voltage monitoring relay. For 12V, 24V, 48V & 110V batteries
Replacement for BVCD, BVCE, BVCF
8 - 180V
          BMWB DC Universal DC voltage relay. Individual Low & High voltage plus hysteresis setting 12,5 - 340V
          BVSA DC Battery symmetry monitoring relay 12, 24 and 48V
          BMSA DC Battery symmetry monitoring relay with digital setting and display
Symmetry setting: 1 to 20% of cell voltage
24 - 256V
          BRIA DC DC ripple relay. Setting: 0.4 – 6.4% ripple 18 - 340V
Phase, Neutral & Ground monitoring. 3, 4 or 5 wire
          PMSA AC RMS Neutral to Ground plus RMS Phase to Neutral or RMS Phase to phase 50 - 830V
suppl.: 18-288V
Phase failure relays, 3 or 4 wire
        Voltage and asymmetry
          PADA AC 3w Unbalance & Balanced under & over voltage 100 - 480V
          PADI AC 3w PADA with true time delay 100 - 480V
          PANA AC 4w PADA with test for Neutral 100 - 480V
          PANI AC 4w PADA with test for Neutral and true time delay 100 - 480V
        Voltage and asymmetry + phase rotation
          PAHA AC 3w Phase rotation w. 2 relays, Unbalance & Balanced under & over voltage 100 - 480V
          PAHI AC 3w PAHA with true time delay 100 - 480V
          PAMA AC 4w PAHA with test for Neutral 100 - 480V
          PAMI AC 4w PAHA with test for Neutral and true time delay 100 - 480V
        Voltage and asymmetry + Frequency
          PAFA AC 3w Frequency 50, 60 and 400Hz, Unbalance & Balanced under & over voltage 100 - 480V
          PAGA AC 4w PAFA with test for Neutral 100 - 480V
        Voltage and asymmetry + Frequency + phase rotation
          PAFB AC 3w PAFA with test for Phase rotation 100 - 480V
          PAGB AC 4w PAFA with test for Phase rotation and Neutral 100 - 480V
Load monitoring relays
        Power factor Cos Phi
          LMCB Ph. Angle Over or Under load. 2, 3 and 4 wire 24 - 440V
        Active power
          LMWB AC Watt Over & Under load or 2 x Overload. Analogue adjustment. 2, 3 and 4 wire 60 - 400V
Engine & generator relays
        Starter
          ESPA DC Programmable start or pause firs. 1-15 trials 9 - 30V
        Starter inhibit
          FXAA Freq. Frequency range from 10 to 5120Hz. Transformer, Namur or optocoupler input 12V
          FAAA Freq. Frequency range from 10 to 5120Hz. Transformer, Namur or optocoupler input 24V
        Over speed
          FXBA Freq. Frequency range from 10 to 5120Hz. Transformer, Namur or optocoupler input 12V
          FABA Freq. Frequency range from 10 to 5120Hz. Transformer, Namur or optocoupler input 24V
        Starter inhibit and over speed
          FRAA Freq. Frequency range from 10 to 5120Hz. Transformer, Namur or optocoupler input 12V
          FRBA Freq. Frequency range from 10 to 5120Hz. Transformer, Namur or optocoupler input 24V
        Synchronizer
          SYND AC 2w Synchronization of grid and generators 100 - 500V
          SYPD Bus 3w Optional 96x96 Panel indicator to SYND Bus 3 wire
Isolation amplifiers
        Multi function, Volt and mA input
          AISA DC Programmable: 8 input and 8 output volt/mA ranges. Includes power supply 24 - 440V
        Multifunction, mV input
          AISB DC Programmable: 4 mV input and 8 volt/mA output ranges. Includes power supply 24 - 440V
        Multifunction, Volt input
          UISA DC Programmable w.16 input volt ranges and, 8 output V/mA ranges. Incl. power supply 24 - 440V
          UISB DC Programmable w.16 input volt ranges and current loop output. Incl. power supply 24 - 440V
        Volt in and current loop out
          UIDA DC 2 input ranges: 4.8 - 24V and 6 - 30V to current loop 4 - 20mA
        Current loop isolator
          AITA DC Current loop. 3 loops 4 to 20mA. Loop powered 4 - 20mA
          AITB DC Current loop. 1 loop 4 to 20mA. Loop powered 4 - 20mA
Transducers
        Current
          IAMA AC Dual range: 1 & 5Aac in to 6 standard V/mA output ranges 24 - 440V
          IAMB AC Dual range: 1 & 5Aac in to 4 - 20mA current loop out 24 - 440V
        Voltage
          UAMA AC Dual range: 250 & 500Vac in to 6 standard V/mA output ranges 24 - 440V
          UAMB AC Dual range: 250 & 500Vac in to 4 - 20mA current loop out 24 - 440V
        Frequency
          FAMA Freq. Min. & Max. range specified from 1 to 5000Hz. 8 V/mA output ranges 24 - 440V
        Power Active
          WAAA AC Watt 1 - Phase 2 wire. Select from 19 Volt or mA unipolar or bipolar outputs 24 - 440V
          WABA AC Watt 3 - Phase 3 & 4 wire symmetrical load. 24 - 440V
          WACA AC Watt 3 - Phase 3 wire asymmetrical load (Aron coupling) 24 - 440V
          WADA AC Watt 3 - Phase 3 & 4 wire asymmetrical load 24 - 440V
        Power Reactive
          WRBA AC Watt 3 - Phase 3 & 4 wire symmetrical load 24 - 440V
          WRCA AC Watt 3 - Phase 3 wire asymmetrical load (Aron coupling) 24 - 440V
          WRDA AC Watt 3 - Phase 3 & 4 wire asymmetrical load 24 - 440V
        Compact Smart Meter incl. Current Transformer, ModBUS
          PM-2133 AC Watt 3 - Phase 3 & 4 wire asymmetrical load 10 - 500V
          PM-2134 AC Watt 1 - Phase 4 wire asymmetrical load 10 - 300V
Design of housing for 35/45/55 and 22,5 mm housing
          DEH   Cabinet drawings  

 

 

Thiim A/S     -     Transformervej 31     -     2860 Søborg     -     Danmark     -     Telefon: 4485 8000     -     Fax: 4485 8005     -     CVR: DK34649510     -      thiim@thiim.com

Visa Dankort Master Card JCB American Express